Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Fast, Reliable Garage Door Installation Across The Acreage
Garage door installation in The Acreage runs $700-$2,200 for a standard single or double door, and $1,200-$2,200 for a custom wind-load-rated door sized to your opening. We’re Servo Garage Doors West Palm Beach, and we work on more oversized, non-standard garage openings in The Acreage than most companies see in a year anywhere else. If your door is rusted through at the bottom panels, leaking daylight at the tracks, or still running hardware from the Reagan administration, call (561) 489-7509. We’ll give you a written price before any work starts, not a ballpark over the phone that changes when the truck shows up.
Why Servo Garage Doors West Palm Beach Is The Acreage’s Preferred Garage Door Installation Company
The Acreage is not a subdivision. It’s 54 square miles of minimum 1.25-acre lots, unpaved roads in places, and garages that were built around how the original owner lived, not around a developer’s floor plan. That means standard pricing sheets and standard parts inventories don’t survive contact with this community. Marcus Deller, who leads our team, has built the business around a simple rule: photograph the failed component before quoting a replacement. It’s Clause 4 of The Haven Standard, the written operating agreement every Servo technician works under, and it exists because homeowners in The Acreage have every reason to ask “show me what’s actually wrong” before writing a check.
We answer the phone 24/7 with a live person. When you call for garage door installation in The Acreage, you get a named technician and an on-the-way text, not a callback window sometime between Tuesday and Thursday. That matters when your door won’t close and your workshop has $40,000 of tools sitting behind a gap the size of a welcome mat. Every job closes with a documented photo record: what we found, what we did, what it looked like when we left. You get the evidence, not a story.
We’re independently owned and operated under The Haven Standard. We don’t franchise. There’s no corporate script. Our technicians are background-checked, uniformed, and licensed, and they carry the parts this area actually needs on the truck. That last part sounds small until you’re the third company a homeowner has called about a 10-foot door that nobody can match.
Our Garage Door Installation Services in The Acreage

Every Garage Door Installation job in The Acreage starts with the same question: what does the opening actually measure? In conventional subdivisions, the answer is almost always 16×7 or 9×7. Here, it’s frequently 18 feet, 20 feet, 10 feet tall, or some custom dimension a homeowner and a welder agreed on in 1987. We measure first, quote a flat written price, and then install.
New Door Installation
A new steel sectional door in The Acreage typically runs $700-$2,200, depending on size, insulation level, and wind-load rating. For most homes, we recommend a two-layer steel door with an R-value of at least 9, which keeps the garage from becoming a kiln in August and reduces the humidity that eats springs and hinges. Every door we recommend for The Acreage meets Palm Beach County’s current Florida Building Code wind-load requirements. If your existing door predates the 2002 code, it almost certainly doesn’t.

Single Car Door
Single-car doors in The Acreage run 8 to 10 feet wide. The smaller footprint means lower material cost, but don’t assume it’s a simple swap. Many single-car garages in this community were built with wood-framed walls and non-uniform rough openings, which means shimming, track adjustment, and sometimes new framing before the door goes in. We quote all of that upfront, in writing.

Double Car Door
The standard double door is 16×7, but we see plenty of 18-foot and 20-foot openings in The Acreage, especially on custom builds from the late 1970s through the 2000s. Those wider openings put more tension on torsion springs and more load on the tracks, so we size components to the actual panel weight, not the catalog’s default. A 16-foot door starts around $900 installed; an 18-foot starts around $1,100, and a 20-foot custom width lands closer to $1,500-$2,000 before insulation and wind-load upgrades.

Custom Garage Door
Custom is not a premium upsell in The Acreage. It’s the default. RV-height 10-foot openings, triple-wide attached garages, and detached shop doors for boats and ATVs all require doors that don’t exist on a standard supply truck. We source custom-height and custom-width doors from Clopay and Amarr, and we wind the torsion springs on site to match the exact panel weight. A wind-load-rated custom steel door runs $1,200-$2,200 installed. Prep work for non-standard rough openings is quoted separately before we start.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in The Acreage
We install and service Clopay, Amarr, Wayne Dalton, and Craftsman, along with LiftMaster, Chamberlain, Genie, and Raynor openers. For The Acreage specifically, we stock wind-load-rated Clopay steel doors in the most common custom widths and heights, because ordering from the manufacturer adds two to three weeks to a job that’s already urgent. If your door is a Wayne Dalton or a Craftsman from the original build, we can match the panel profile in most cases, or replace it outright with a code-compliant model and hand you the documentation for your insurance file.
Common Garage Door Installation Problems We See in The Acreage Homes

- Rusted bottom panels from seasonal flooding: The Acreage sits on a high water table, and low-lying parcels see standing water every summer. That water wicks up into the bottom steel panels and floor-level tracks, corroding them from the inside out. By the time you see rust bubbles on the outside, the panel is usually beyond repair.
- Non-hurricane-rated doors from the pre-2002 era: Before Florida adopted its current building code, garage doors didn’t have to resist wind-borne debris. A door from 1995 can crack or blow in during a serious storm, and once it does, you can’t legally repair it. Replacement is the only option, and the new door has to meet current wind-load ratings.
- Custom springs and cables from previous handyman retrofits: We regularly open up a panel in The Acreage and find spring wire that was custom-wound because the original owner built a door opening that doesn’t match anything in a catalog. Replacement parts aren’t on any supply truck. They have to be wound on site, and a crew that doesn’t know that will burn half a day figuring it out.
- Detached shop doors with non-uniform rough openings: The detached structures built for boats, horse trailers, and ATVs rarely have plumb, square openings. Wood framing has shifted over 30 years in The Acreage’s humidity, and the door has to be installed to the opening as it exists, with the gaps sealed properly or water comes in every time it rains.
We recently replaced a 20-foot-wide custom sectional door on a detached shop off 140th Avenue North. The original one-piece door, built in 1984, had bottom panels so corroded from decades of seasonal flooding that you could push a screwdriver through them. Our crew measured the non-uniform rough opening, sourced a wind-load-rated Clopay steel door with an R-value of 12.9, and rewound the custom torsion springs to match the heavier panel weight. A standard supply truck would not have covered that job. We did it in one day.
Pricing for Garage Door Installation in The Acreage, FL
Here’s what you can expect to pay for garage door work in The Acreage. These are written-price ranges, not phone estimates that drift upward once the technician is standing in your driveway.
| Service | Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Custom Garage Door (wind-load rated) | $1,200-$2,200 |
| Spring Repair (torsion or extension) | $180-$340 |
| Cable Repair | $130-$250 |
| Opener Installation | $250-$550 |
What moves the number on a door installation is the opening size, the door’s wind-load rating, the insulation level, and whether we’re working with a square opening or fighting 30 years of frame movement. The price we quote is the price you pay. It’s written, flat, and delivered before you approve any work. Call (561) 489-7509 for an exact quote on your door.
We Also Serve Cities Near The Acreage

Our crews serve The Acreage and the surrounding communities, including West Palm Beach, Westgate, Riviera Beach, and Lake Park. If you’re in a nearby city with an older garage door or an opener that’s giving up, call (561) 489-7509 and we’ll get a technician to you with the same written-price process.
Serving The Acreage, FL - Our Local Coverage Area
We’re based in the The Acreage area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in The Acreage

Yes, any new garage door installed in The Acreage must meet Palm Beach County’s Florida Building Code wind-load requirements, and if your existing door was installed before 2002, it likely doesn’t. The quick check: look for a metal sticker or label on the door panel that states its wind-load rating and Florida Product Approval number. No sticker, no compliance. If you can’t find one, it’s time to plan a replacement, because repairing a non-compliant door after it fails a storm inspection isn’t a legal option. Call (561) 489-7509 and we’ll check it during the estimate.
It depends on what the panels and tracks look like. If the panels are sound, the tracks are straight, and the only failure is a broken torsion spring, spring replacement runs $180-$340 and we can do it same day. But if the bottom panels are rusted through from flooding, or the door predates Florida’s 2002 wind-load code, replacing the springs is just buying time on a door you’ll be forced to replace anyway. A 12-foot wind-load-rated custom door runs $1,200-$2,200. We’ll photograph what we find and show you both options before you commit to either.
The Acreage’s humidity and seasonal flooding corrode metal components at roughly double the rate of drier inland communities. Torsion springs rust, lose their temper, and snap. Hinges seize. Rollers grind. Bottom seals rot and let more water in, which accelerates everything else. The annual rainfall patterns combined with the high water table mean your hardware is working in a salt-free but persistently wet environment, and standard galvanized parts simply don’t hold up. We install rust-resistant hardware on every The Acreage job, and we document it in your photo record so you can see the difference.
If your opening is wider than 16 feet or taller than 8 feet, it’s a custom order. Triple-wide attached garages in The Acreage run anywhere from 18 to 22 feet wide, and RV-height means 10 feet or more. A standard 16×7 door will not fit, and trying to frame down an oversized opening usually costs more than ordering the correct custom door in the first place. We measure, confirm the exact panel width and height against the manufacturer’s specs, and quote a wind-load-rated custom Clopay or Amarr door at $1,200-$2,200. Call (561) 489-7509 and we’ll bring the measuring gear, not a salesman’s pitch.
A one-piece door from the 1980s or 1990s can be repaired if the hardware is still manufactured, but the reality is most parts for those doors are discontinued, the panels are uninsulated, and the door does not meet current wind-load code. A new sectional door is insulated, hurricane-rated, and opens vertically on tracks so you can park closer to the door. The installed cost runs $700-$2,200 depending on size and rating. We’ll photograph your old door’s failure points, show you the repair cost next to the replacement cost, and let you decide with actual numbers in front of you.
If your garage door is past its service life or the opening was never standard to begin with, call us. We serve The Acreage with the same process on every job: measure, photograph, quote in writing, install, document. No surprises at the end. (561) 489-7509.
Written by Marcus Deller, Owner at Servo Garage Doors West Palm Beach, operating under The Haven Standard since 2015.






Before
After
Before
After